Short retail-boxed coil of soft copper tubing from JMF's Utility Grade line, sized for do-it-yourself repairs, appliance hookups and short runs where a full 50 or 60 foot coil is more than the job needs. Small enough to keep on the truck and soft enough to bend by hand.

• Outside diameter: 3/8" (Utility Handi Coils are sized by actual outside diameter, not by nominal water tube size)
• Flare and compression fittings are called out by tube outside diameter, so a 3/8" flare or compression fitting matches this tube directly; solder fittings are called out by nominal size, so this tube sweats into 1/4" copper fittings
• Length: 25 Ft coil, supplied retail boxed. JMF lists the Utility Handi Coil in 10 Ft through 50 Ft coils in 1/4", 3/8", 1/2" and 5/8" outside diameters
• Soft annealed copper, supplied coiled so it bends by hand without a bender
• C12200 copper; JMF states all of its copper tube is alloy C12200
• Utility Grade is JMF's do-it-yourself line and carries no ASTM tube type designation. JMF publishes ASTM B88 Type K, L and M with NSF/ANSI 61 Annex G drinking water certification for its water tube, and ASTM B280 for its refrigeration coils, but publishes no standard, wall thickness or pressure rating for Utility Grade
• Manufacturer part: 6363806819806

Tip: Check what your local plumbing code requires before putting any tubing in a potable water supply line - Utility Grade is not sold as a code-recognized water tube type, and JMF's Type L Handi Coil is the ASTM B88 version of the same short-coil format. Deburr the inside and outside of a cut end before forming a flare so the flare rolls evenly instead of splitting.