Apex describes the PumpBuddy as a diaphragm activated, variable level, full flow valve, used in pump-fed water tanks or reservoirs, main or storage tanks, or as a control valve backup in rainwater harvesting. Weighted floats on an adjustable cord set the levels the valve opens and closes at, so the tank refills in longer cycles and the pump starts less often. Distributed in the US by Watts.

• Series: Apex PumpBuddy (PB), model PB34LT
• Inlet connection size: 3/4"
• Tail: long tail
• Maximum pressure: 175 PSI
• Inlet pressure: 8 PSI
• Maximum temperature: 140 deg F
• Lead free
• Diaphragm activated - full on/off with soft closing, no water hammer
• Adjustable weighted floats set the open and close levels
• UV stabilized
• Patented self-cleaning mechanism
• Serviceable - repair kit available
• Manufacturer part: 88005615

Long tail: A long tail is an extended inlet that reaches through the tank wall. Apex notes on its long-tail valves that no separate tank fitting is required. The standard-tail version of this size is Apex model PB34.

Keep it clear of the outlet: Apex specifies a minimum 8" (200mm) head above the valve and says to keep a 12" (300mm) head on the pump outlet at all times.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.watts.com/prop65