The Steelworks 11122 is a 60" length of heavy-duty 14 gauge zinc-plated slotted steel angle, 1-1/2" on each leg. Pre-punched slot patterns on both faces let you bolt, screw, or rivet pieces together at adjustable positions without drilling -- build shelving units, workbench frames, equipment racks, gussets, brackets, and any custom structure where repositionable fasteners save fabrication time.

• Angle width: 1-1/2" x 1-1/2"
• Length: 60"
• Gauge: 14 (heavy-duty 14 gauge)
• Zinc-plated steel (interior or covered exterior use)
• Pre-punched slot pattern on both legs accepts standard 1/4" bolts, machine screws, and rivets
• Cuts to length with a hacksaw, chop saw, or cutoff wheel
• Hillman/Steelworks part 11122

Tip: The 14-gauge stock carries heavier static loads on shelving uprights, equipment racks, and workbench frames. 60" reaches the 5-ft shelf-upright range and tall workbench frames. For damp or outdoor exposure, add a coat of zinc-rich primer or galvanizing compound after cutting -- bare cut ends are the first place rust starts on zinc-plated stock.