The Steelworks 11115 is a 72" length of light-duty 18 gauge zinc-plated slotted steel angle, 1-1/4" on each leg. Pre-punched slot patterns on both faces let you bolt, screw, or rivet pieces together at adjustable positions without drilling -- build shelving units, workbench frames, equipment racks, gussets, brackets, and any custom structure where repositionable fasteners save fabrication time.

• Angle width: 1-1/4" x 1-1/4"
• Length: 72"
• Gauge: 18 (light-duty 18 gauge)
• Zinc-plated steel (interior or covered exterior use)
• Pre-punched slot pattern on both legs accepts standard 1/4" bolts, machine screws, and rivets
• Cuts to length with a hacksaw, chop saw, or cutoff wheel
• Hillman/Steelworks part 11115

Tip: The 18-gauge stock suits brackets, gussets, light shelf uprights, and equipment mounts where weight savings matter. 72" gives full 6-ft shelving uprights and light structural framing without splicing. For damp or outdoor exposure, add a coat of zinc-rich primer or galvanizing compound after cutting -- bare cut ends are the first place rust starts on zinc-plated stock.