The Steelworks 11112 is a 36" length of light-duty 18 gauge zinc-plated slotted steel angle, 1-1/4" on each leg. Pre-punched slot patterns on both faces let you bolt, screw, or rivet pieces together at adjustable positions without drilling -- build shelving units, workbench frames, equipment racks, gussets, brackets, and any custom structure where repositionable fasteners save fabrication time.

• Angle width: 1-1/4" x 1-1/4"
• Length: 36"
• Gauge: 18 (light-duty 18 gauge)
• Zinc-plated steel (interior or covered exterior use)
• Pre-punched slot pattern on both legs accepts standard 1/4" bolts, machine screws, and rivets
• Cuts to length with a hacksaw, chop saw, or cutoff wheel
• Hillman/Steelworks part 11112

Tip: The 18-gauge stock suits brackets, gussets, light shelf uprights, and equipment mounts where weight savings matter. 36" works for small shelf uprights, narrow racks, and short workbench legs. For damp or outdoor exposure, add a coat of zinc-rich primer or galvanizing compound after cutting -- bare cut ends are the first place rust starts on zinc-plated stock.