Wood Veneer Edging, Almond - 7/8" x 8 Ft

Select Desc:

Description:

Item # PFKKRWUPC: 717185880555
BAND-IT REAL WOOD VENEER EDGING

Accent your project with the handsome good looks of real wood, conveniently and economically with BAND-IT Real Wood Edgebanding. Repair or enhance cabinetry, furniture, shelving, crafts, and any other flat or cylindrical project with a clean finished wood edge.

Pre-sanded furniture-grade veneer, paper-backed with resin-impregnated paper that prevents splitting and tearing during handling. Apply with a preheated (about 400 degree) household iron; press along the length of the edging until the hot-melt adhesive on the reverse melts and bonds. If a mistake is made during application, simply reheat and reposition. Allow the edging to cool completely before trimming or topcoating.

  • Species: Almond
  • Width: 7/8", Length: 8 Ft
  • Grain runs the length of the edge banding for clean miter and butt joints
  • Iron-on hot-melt adhesive bond -- no contact cement, no specialized tools required
  • Pre-sanded face ready to stain, oil, or clear-finish to match existing case work
  • Trims with scissors, a sharp utility knife, or a dedicated edge-trimmer tool
  • Bonds to plywood, particle board, MDF, hardboard, solid wood, and even metal substrates
  • Repair chips, dents, water stains, and outdated colors with a fresh wood face
  • Sized for a single shelf, drawer front, or small cabinet face frame run

Tip: This Almond finish is a pre-colored warm beige; no stain needed -- top-coat with clear polyurethane for wear protection and a consistent sheen. Set the iron to high (cotton/linen, no steam) and press in 4-5 second overlapping passes along the strip. Roll the edging down with a wallpaper seam roller or J-roller immediately after the iron to seat it fully while the adhesive is still hot. Trim flush with an edge-trimmer or a sharp chisel held bevel-up, then knock the corner lightly with 220-grit before applying finish.


FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

  • ⚠  Warning: Drilling Sawing Sanding Or Machining Wood Products Can Expose You To Wood Dust A Substance Know To The State Of California To Cause Cancer. Avoid Inhaling Wood Dust Or Use A Dust Mask Or Other Safeguards For Personal Protection. For More Inf