Cover larger flat surfaces with the natural beauty of real Red Oak veneer. BAND-IT Real Wood Facing refaces cabinet sides, panel doors, shelving, drawer fronts, and furniture with a genuine wood face -- no contact cement, no specialized tools required.

Paper-backed with resin-impregnated paper that resists splitting across glue-up, and pre-sanded ready to stain or clear-finish as desired. Apply with a preheated (about 400 degree) household iron; press across the surface in 4-5 second overlapping passes until the hot-melt adhesive on the reverse melts and bonds. If a mistake is made, simply reheat and reposition. Allow to cool completely before trimming, sanding, or topcoating. Trims with a sharp utility knife or veneer saw.

• Species: Red Oak (real wood veneer face)
• Sheet size: 24" x 98"
• Iron-on application with household iron -- hot-melt adhesive bonded to the paper backing
• Paper backing prevents splitting during handling and across the glue-up
• Pre-sanded face ready to stain, oil, or clear-finish to match adjacent cabinetry
• Trims with scissors, a sharp utility knife, a veneer saw, or an edge-trimmer tool
• Bonds to plywood, particle board, MDF, hardboard, solid wood, and even metal substrates
• Crafted from furniture-grade hardwood veneer
• A 98" sheet covers a full pantry or refrigerator end panel and runs the length of a 96"-tall cabinet stile

Tip: Red Oak has prominent open grain that takes oil-based pigment stains beautifully; water-based stains can blotch, so pre-condition the surface first. Lightly sand the substrate with 120-grit before applying so the veneer can bond uniformly. Set the iron to high (cotton/linen, no steam) and work from one edge to the other in 4-5 second overlapping passes. Roll the veneer down with a J-roller or wallpaper seam roller as you go to expel any air pockets while the adhesive is still hot. Finish-sand with 220-grit after install and prefer oil-based stains to avoid raising the grain.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  Warning: Drilling Sawing Sanding Or Machining Wood Products Can Expose You To Wood Dust A Substance Know To The State Of California To Cause Cancer. Avoid Inhaling Wood Dust Or Use A Dust Mask Or Other Safeguards For Personal Protection. For More Inf