Rust-Oleum Professional High Performance Protective Enamel is an oil-modified alkyd enamel with excellent rust prevention when applied directly to metal. It also offers excellent coverage, chip resistance and color retention, making it a commercial-quality finish for heavy-duty environments indoors and out.

• Color: Gloss Regal Red
• Size: 1 Gallon
• Oil-modified alkyd, direct-to-metal (DTM) - goes straight onto clean metal
• For maximum rust prevention, prime first
• Practical coverage: 230-390 sq ft per gallon at the recommended 1.5-2.5 mil dry film thickness (assumes 15% material loss)
• Dry times at 70F and 50% relative humidity: tack-free in 2-4 hours, handle in 5-9 hours, recoat after 24 hours
• Under 450 g/L VOC; 51-59% solids by weight
• Can be used over most latex or oil paints
• Not for use on galvanized steel
• Not recommended for water immersion, or for surfaces that exceed 200F (93C) when heated
• 5-year shelf life
• Manufacturer part number: 7765402

Surface Prep: Clean the surface with soap and water, rinse and let dry. Remove loose paint and rust with a wire brush or sandpaper, and lightly sand glossy surfaces.

Application Tip: Apply only when air and surface temperatures are between 32 and 90F and humidity is below 65%. Mix thoroughly first so any settled pigment is re-dispersed. Brush and roller application normally needs no thinning - thin only with acetone if necessary, never with gasoline, lacquer thinner or turpentine. Clean tools with mineral spirits.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov