Old Masters Interior Oil-Based Polyurethane is a self-leveling, clear finish designed to protect the beauty of interior surfaces. Easy to apply and quick drying, it delivers lasting, durable protection from abrasion, marring, chipping, alcohol, and water. Recommended for interior wood, primed metal, and fiberglass surfaces, and great on floors, bars, counters, tabletops, cabinets, wood paneling, and doors.

• Sheen: Gloss
• Size: 1/2 Pint
• Coverage: approximately 31 sq ft per container (500 sq ft per gallon)
• Self-leveling clear finish for bare, stained or previously finished wood
• Apply with pure bristle or polyester brush, flat pad, or spray - do not thin
• Dries to touch in 3 hours; allow 6 hours before recoating, overnight preferred
• Two coats recommended; more for high traffic or abrasive conditions
• Sand lightly between coats with 220-grit sandpaper
• Wait 24 hours before light use; on floors, 72 hours before replacing furniture
• Clean up with paint thinner or mineral spirits
• Max VOC: 450 grams/liter

Tip: Stir thoroughly before and during application - do not shake. Apply in full, even coats in the direction of the grain.

DANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required. Immediately place them in a sealed, water-filled metal container and dispose of in accordance with local fire regulations.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov