Old Masters Interior Oil-Based Polyurethane in an aerosol can - the same self-leveling, clear finish that protects interior surfaces from abrasion, marring, chipping, alcohol, and water, in a spray that needs no brush or roller. Recommended for interior wood, primed metal, and fiberglass surfaces, on bare, stained or previously finished work.

• Sheen: Satin
• Size: 12.8 oz aerosol can
• Self-leveling clear oil-based finish
• Dries to touch in 3 hours; allow 6 hours before recoating, overnight preferred
• Two coats recommended; more for high traffic or abrasive conditions
• Sand lightly between coats with 220-grit sandpaper
• Wait 24 hours before light use; on floors, 72 hours before replacing furniture
• Clean up with paint thinner or mineral spirits

Tip: Apply in thin, even coats in the direction of the grain, and remove sanding dust with a tack rag before each coat.

DANGER: Rags, steel wool, sanding residue, and other wastes used or soaked with this product may spontaneously catch fire if improperly discarded. No ignition source is required. Immediately place them in a sealed, water-filled metal container and dispose of in accordance with local fire regulations.