Anderson Metals lead free brass half union connects 1/4" flare tubing to 1/8" male iron pipe (MIP) threads in one fitting. The 45-degree flare joint resists mechanical pullout and can be taken apart and reassembled many times with no effect on the seal.

• Connection: 1/4" SAE 45-degree flare x 1/8" male pipe thread (MIP/MPT)
• Brass construction
• Temperature range: -65 degrees F to 250 degrees F
• Use with copper, brass, aluminum, or steel tubing
• Primary uses: fuel equipment, plumbing, gases, refrigeration, and vacuum
• Lead free compliant product which meets Public Law 111-380
• Manufacturer part: 754048-0402

Tip: Cut a smooth, square end on the tubing, slide the flare nut onto the tube with its threads facing the end, flare the tube end, then thread the nut onto the fitting body until snug plus about 1/6 turn.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: This product can expose you to lead a chemical known to the State of California to cause cancer and reproductive harm. www.P65Warnings.ca.gov