Fixed-pattern pop-up spray head for in-ground residential irrigation systems. Delivers a quarter spray pattern (90-degree corner arc) with 10 to 15 feet of throw -- suitable for medium and large lawn zones. Fits standard 1/2" NPT risers and pops up 2" above the turf when the zone runs.

• Quarter pattern fixed nozzle (90-degree corner arc)
• 10 to 15 Ft spray radius -- sized for medium to large lawn zones
• 2" pop-up height clears typical mowed grass
• Pre-installed pressure regulator maintains 30 PSI at the nozzle for even droplet size and consistent throw
• Prevents misting caused by high line pressure -- less water waste, less overspray onto walkways
• 1/2" female NPT inlet -- compatible with standard poly riser tees and swing pipe
• Reinforced cap threads and strengthened inlet filter resist grit and repeat winter freezes
• Model 80348

Installation Tip: Set the head flush with the finished grade -- too high risks mower damage, too low causes turf coverage gaps. After turning the zone on, flush the line briefly before threading the head onto the riser to clear debris from new pipe runs.

Note: Fixed-pattern heads do not adjust after installation -- match the head model to the shape of the zone before installing. Pair with matched-precipitation-rate strip nozzles when covering the same zone as radial heads.