ARROW 18 GAUGE BRAD NAILS, BRIGHT FINISH - 2"

Arrow Fastener 18-gauge collated brad nails for pneumatic and battery-powered brad nailers. The 2" length is the long end of the 18-gauge range - reach for it when you need a brad to grab into framing behind thicker trim or built-up molding without stepping up to a thicker, more visible 16-gauge finish nail.

• 18 gauge (0.0475") collated bright steel brad nails, 2" (51 mm) length
• Bright finish for clean interior trim and cabinet work
• Compatible with Arrow PT18G and other 18-gauge brad nailers that accept standard 18 ga collated brads
• 1,000 brads per pack
• Slim 18 ga shank reduces splitting in hardwood trim and leaves a near-invisible hole that fills with a dab of putty
• Color: Bright

Tip: The 2" length is for thicker stock - stacked crown moldings, built-up baseboard, plinth blocks, and 3/4" face frames on cabinets where shorter brads bottom out in the stile before catching the framing. Confirm your nailer is rated for 2" brads (some 18 ga nailers cap out at 1-1/2"), set the drive depth to bury just below flush, and stay 3/8" off edges to prevent splitting.