ARROW 18 GAUGE BRAD NAILS, BRIGHT FINISH - 1-1/2"

Arrow Fastener 18-gauge collated brad nails for pneumatic and battery-powered brad nailers. The 1-1/2" length gives extra holding power for medium-thickness finish work - casing, base shoe, chair rail, and shelf cleats - while the slim 18-gauge shank still drives below the surface with a hole small enough to fill cleanly.

• 18 gauge (0.0475") collated bright steel brad nails, 1-1/2" (38 mm) length
• Bright finish for clean interior trim and cabinet work
• Compatible with Arrow PT18G and other 18-gauge brad nailers that accept standard 18 ga collated brads
• 1,000 brads per pack
• Slim 18 ga shank reduces splitting in hardwood trim and leaves a near-invisible hole that fills with a dab of putty
• Color: Bright

Tip: The 1-1/2" length is the all-purpose finish brad - long enough to bite into the framing or substrate behind 1/2" to 3/4" trim stock. Set the nailer to leave the brad just below flush, then fill the dimple with color-matched wood putty before priming. Avoid driving brads within 3/8" of an edge to prevent splitting on hardwood.