Watco Lacquer Clear Wood Finish is a durable lacquer for furniture, doors, cabinets and paneling. It fills the pores of most woods, eliminating the need for wood filler, and dries to a crystal-clear protective finish. This aerosol version sprays on in light, even coats.

• Fills the pores of most woods - no wood filler needed
• For furniture, doors, cabinets and paneling; not recommended for floors or exterior surfaces
• Resin: nitrocellulose modified alkyd
• Coverage: about 40 sq ft per can at 1.0-1.5 mils dry film per coat
• Dry to touch in 30 minutes; recoat after 2 hours
• Light use after 24 hours; normal use after 7 days
• A minimum of 3 coats is recommended
• Apply when air and surface temperatures are 55-90 deg F and relative humidity is below 85%
• Sheen: Gloss
• Size: 11.25 oz aerosol spray

Tip: Shake the can for 2 minutes, then spray light coats from 8 to 12 inches away to avoid runs and sags. If a coat has dried more than 6 hours, lightly sand with 220 grit sandpaper before recoating.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov