Watco Lacquer Clear Wood Finish is a durable brushing lacquer for furniture, doors, cabinets and paneling. It fills the pores of most woods, eliminating the need for wood filler, and dries to a crystal-clear protective finish.

• Fills the pores of most woods - no wood filler needed
• For furniture, doors, cabinets and paneling; not recommended for floors or exterior surfaces
• Resin: nitrocellulose modified alkyd
• Coverage: 190-290 sq ft per gallon at 1.0-1.5 mils dry film per coat
• Dry to touch in 1 hour; recoat only when the previous coat has dried clear and feels hard
• Light use after 24 hours; normal use after 7 days
• A minimum of 3 coats is recommended
• Apply when air and surface temperatures are 55-90 deg F and relative humidity is below 85%
• Cleanup: lacquer thinner
• Sheen: Gloss
• Size: Quart, brush-on

Tip: Stir thoroughly - do not shake - and apply with a good quality bristle brush; do not use a roller. If a coat has dried more than 6 hours, lightly sand with 220 grit sandpaper before recoating to avoid brush marks.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov