Rust-Oleum Varathane Polyurethane Spray puts the same oil-modified polyurethane into an 11.25 oz aerosol, giving interior wood scratch and stain resistance with no brush marks. It reaches spindles, louvers, carvings and other detail that is awkward to brush.

• Oil-modified urethane in an 11.25 oz aerosol
• Finish: Semi-Gloss
• For furniture, doors, cabinets, paneling and trim; not recommended for linoleum, vinyl, glazed tile or metal, and Rust-Oleum directs wood floors to Varathane Floor Finishes
• Coverage: 20-25 sq ft per can at a 1.0-1.5 mil dry film thickness
• Dries to the touch in 2 hours and can be recoated after 2 hours; allow 24 hours before full use
• Shake the can well, then spray light coats from 10-12 inches away
• Clean up wet material with xylene or mineral spirits
• Sold as a case of 6 cans
• Size: 11.25 oz aerosol can

Tip: Apply between 55 and 90 deg F with relative humidity below 85 percent, and not in direct sunlight. Several light coats give a better finish than one heavy coat; sand lightly with 220-grit between coats and apply at least three coats for maximum durability. When you are done, clear the valve by turning the can upside down and spraying for 5 seconds.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov