Rust-Oleum High Heat renews and protects metal surfaces subject to heat up to 1200 deg F, holding its color through repeated heating cycles where ordinary paint fails - most Rust-Oleum paints are rated to only about 200 deg F surface temperature. Use it on the exterior of barbeque grills, wood stoves, radiators, fire pits, fireplace screens, and automotive parts.

• 1/2 Pint brush-on can in BBQ Black
• Withstands dry heat up to 1200 deg F (648 deg C)
• Air dries to a satin finish and heat cures to a flat finish
• Silicone modified alkyd; rust-preventive and corrosion-resistant, indoor or outdoor
• Priming is not recommended - apply directly to clean, sound metal
• Covers approximately 16-33 sq ft
• Dries to the touch in 2-4 hours and to handle in 5-9 hours; fully dry in 24 hours
• Apply by brush, nap roller, or conventional spray gun; a second coat is not recommended
• Manufacturer part: 7778730

Do not use on metal directly exposed to open flame, or on surfaces in direct contact with food such as a grill grate. Apply between 50 and 90 deg F with humidity below 85 percent.

Heat curing: allow the paint to dry 24 hours before heating. Heat curing is required for service above 500 deg F - cure at 450 deg F for one hour to develop full performance and durability. The finish may emit smoke and a harmless odor the first time it is heated, so ventilate the area.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov