Diablo premium drywall sanding sheets for fast, clean finishing on drywall, joint compound, plaster, and skim coats. The 180 grit (Fine) is suited for fine smoothing of feathered edges and final pre-primer prep on mud-skim coats. Sheets are pre-cut to the standard 4-3/16" x 11-1/4" footprint so they drop straight onto pole sanders and standard drywall hand sander pads.

• 180 grit (Fine) - fine smoothing of feathered edges and final pre-primer prep on mud-skim coats
• Sheet size: 4-3/16" x 11-1/4" - fits standard drywall hand sanders and pole sanders
• Premium ceramic-blend abrasive grain for fast cut and longer life than aluminum oxide
• Clog-SHIELD coating sheds drywall dust and gypsum loading that bog down standard paper
• ENDURA-BOND grit-to-backing system keeps grains in place under aggressive sanding
• Heavy paper backing rated for wet or dry use - dampening sheets reduces airborne dust
• 10 sheets per pack

Tip: Work the grits in sequence - 100 to knock down mud peaks, then 120 or 150 to blend, then 180 or 220 to finish. Skipping grits leaves deeper scratches that print through primer. Light pressure cuts faster than leaning into the sander - heavy pressure heats the abrasive and loads it with gypsum. For dust control, attach the pad to a vacuum-ready sander or lightly mist sheets with water; a damp sheet cuts dust dramatically without losing much cut speed. Wear an N95 or better - drywall dust contains silica.