Satco's 5.5W LED globe bulb is a candelabra-base decorative lamp built to drop straight into incandescent chandeliers, vanity fixtures, pendants, and ceiling fans. It delivers about 500 lumens with a 2700K warm white color temperature - the same glow shape as a 60-watt incandescent globe, on roughly one-tenth the power.

• 5.5W LED, 60W incandescent equivalent
• 500 lumens, 2700K warm white
• Clear glass globe
• E12 candelabra base
• Dimmable on most standard incandescent and LED-rated dimmers
• 15,000-hour rated life
• Energy Star qualified
• Indoor use

Use Case: Drop-in replacement for incandescent globe lamps in chandeliers, vanity bars over bathroom mirrors, decorative pendants, candelabra wall sconces, ceiling fan light kits, and small-base table lamps. Decorative shape leaves the bulb visible in fixtures with no shade, so the glass profile matches a traditional globe.

Finish Tip: Clear glass shows the filament-style LED element and throws faceted reflections through chandelier crystals - the right pick when the bulb itself is part of the look.

Color Tip: 2700K warm white reads as a classic incandescent glow - warm and amber-leaning, the standard for living spaces and dining. To stay consistent across a room, match all bulbs in one fixture to the same Kelvin.

Dimmer Tip: LEDs dim cleanly on dimmers rated for LED loads. If you see flicker, buzz, or a dim-floor that won't drop below 30%, the dimmer is the issue - swap to an LED-rated dimmer (Lutron Maestro CL, Lutron Caseta, or Leviton Decora) rather than the bulb. The fixture's minimum LED load (often 5W or 10W) also matters - if you have only one bulb on a circuit, you may need a CL-series dimmer that handles light loads.

Note: Not for use in totally enclosed or fully recessed fixtures unless the fixture is rated for enclosed-LED operation - trapped heat shortens LED life. Not for use with timers, photocells, or eyes unless the control is rated for LED loads.