Zinsser Bulls Eye 1-2-3 Gray is a water-based acrylic primer, sealer, and stain blocker that adheres to virtually any surface without sanding. The gray tint is specifically designed for use under dark, deep, or vivid topcoat colors, reducing the number of finish coats needed compared to white primer. Ideal for interior and exterior use on wood, drywall, plaster, concrete, masonry, metal, and glossy surfaces.

• Water-based formula with low odor and soap-and-water cleanup
• Covers approximately 400-450 sq ft per gallon
• Dries to touch in 30-35 minutes, topcoat in 1 hour
• Sticks to all surfaces without sanding, including glossy finishes
• Blocks stains from grease, rust, tannins, graffiti, and water marks
• Mold and mildew resistant dried film
• Rust inhibitive - suitable for new or bare metal
• Apply by brush, roller, or airless sprayer
• Low VOC (less than 100 g/L)
• Can be applied at temperatures as low as 35 deg F

Tip: Choose gray primer when your topcoat is a dark or saturated color for better hide and fewer coats.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov