Proluxe (formerly Sikkens) Log & Siding is a high-performance translucent satin finish for exterior log homes, siding, trim, beams, and garage doors. The high-solids alkyd-oil formula lays down a premium two-coat finish that lets the natural wood grain show through while protecting the wood from sun and weather.

• Translucent satin finish in Teak
• High-solids alkyd-oil formula -- two-coat application
• UV absorbers and transoxide pigments protect color and the wood beneath
• Flexible resin chemistry expands and contracts with the wood to resist cracking and peeling
• Water-repellent and mildew-resistant
• Coverage: 300-500 sq ft per gallon depending on wood surface and absorbency
• Dry time: 12 hours to touch, 24 hours before recoat
• Cleanup with mineral spirits

Suitable for cedar, fir, pine, spruce, and redwood. Not for horizontal surfaces subject to foot traffic (use a deck-rated finish for decks and walkways).

Tip: Apply at 50-90 deg F to fresh, clean, dry wood -- not in direct hot sun. Brush application gives the best penetration; back-brush after spraying or rolling to work the finish into the grain. Two thin coats outlast one heavy coat by a wide margin and avoid the lap marks and skin issues that come with thick film build.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  Cancer - www.P65Warnings.ca.gov