Anderson Metals 90-degree flare elbow in lead-free brass, joining 3/8" flare tubing to a 1/2" female pipe thread. Anderson lists its primary uses as fuel equipment, plumbing, gases, refrigeration and vacuum.

• Tube O.D. size: 3/8" flare x 1/2" female pipe thread
• 90-degree angle
• Pressure rating: 1000 psi
• Temperature range: -65 deg F to +250 deg F
• Two piece construction - nut and body
• Use with copper, brass, aluminum or steel tubing
• Resists mechanical pullout
• Easy to disassemble and can be reassembled many times with no effect on the seal
• Lead free compliant product which meets Public Law 111-380
• Manufacturer part number: 754050-0608

Tip: Anderson's own assembly sequence: cut a smooth, square end on the tubing; slide the nut onto the tube with the threads facing the end; flare the end of the tube; thread the nut to the body until snug, then 1/6 turn further. Do not put sealant on the flare face - that seal is metal to metal.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: This product can expose you to lead a chemical known to the State of California to cause cancer and reproductive harm. www.P65Warnings.ca.gov