Larsen white PVC flanged tailpiece connects a kitchen, bathroom, or laundry sink strainer to the P-trap. The flanged top seats against the strainer body for a leak-free seal at the drain. The 6" length is the most common pull, covering standard kitchen and bath installations with a few extra inches of reach.

• White PVC plastic, corrosion resistant and lightweight
• 1-1/2" outside diameter sized for standard 1-1/2" tubular P-trap connections
• 6" overall length
• Flanged top forms the seal against the sink strainer
• Slip-joint compatible (slip nut and washer sold separately)
• Cut to length with a hacksaw or PVC tubing cutter if shorter is needed

Installation: Slide a 1-1/2" slip nut and beveled nylon washer over the smooth end, seat the flange against the strainer with plumber's putty or the strainer's own gasket, then bring the smooth end into the P-trap inlet and tighten the slip nut hand-tight plus a quarter turn with channel locks.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: This product can expose you to chemicals including Phthalate which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more Information go to www.P65Warnings.ca.gov.