MasterClear Supreme is a water-base, self-crosslinking acrylic/aliphatic polyurethane protective topcoat that dries quickly to a crystal clear finish. It protects interior surfaces against abrasion, scuffing, chipping, water, alcohol and household chemicals, and protects exterior surfaces from oxidation, salt air, chlorine, acid rain and mildew. Added UV blockers and absorbers greatly reduce the sun's graying and fading effects on stained wood and painted surfaces, keeping them looking fresh for years.

Use it over painted surfaces, wallpaper, doors, columns, cabinetry, windowsills, mantels, wainscot, wood paneling, crown molding, baseboards, chair rails, furniture and picture frames, and on aluminum surfaces such as garage doors, anodized aluminum window casings and aluminum paneling. It is also an excellent clear coat over faux marble and wood-grained finishes.

• Water-base, self-crosslinking acrylic/aliphatic polyurethane topcoat for interior and exterior use
• Sheen: Matte (gloss measured 10-20 at 60 degrees)
• Practical coverage 440-455 sq. ft. per gallon at 1 mil dry film thickness, allowing 15% material loss
• Apply two or more coats for interior work and three or more coats for exterior work
• Brush, roll or spray; stir thoroughly before use, do not shake
• Dry to touch in about 30 minutes, recoat in 1 to 2 hours, full cure in 2 to 3 days at 77 deg F and 50% relative humidity
• Do not apply below 55 deg F or above 95 deg F
• VOC compliant nationwide (less than 50 g/l), very little odor, cleans up with soap and warm water
• Size: Quart

Note: MasterClear Supreme is not recommended over surfaces painted with Modern Masters Metallic Paint Collection, over white or light-colored surfaces, or for use on floors.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov