DAP EXTREME STRETCH ACRYLIC URETHANE PREMIUM ELASTOMERIC SEALANTDAP Extreme Stretch is a premium acrylic urethane elastomeric sealant for sealing a wide range of interior and exterior surfaces - windows, doors, trim, molding, siding, soffits, corner joints, countertops, pipes, vents and ducts. It stretches over 600% so the seal stays crackproof through expansion and contraction, and forms a 100% waterproof, weatherproof seal.
- Color: Woodtone
- Container size: 10.1 fl oz (300 mL) cartridge
- Sold as a case of 12 cartridges
- Acrylic urethane formula stretches over 600% for a long-lasting, crackproof seal
- Adheres to virtually any substrate: wood (painted and unpainted), aluminum, most metals, vinyl, most plastics, glass, drywall, plaster, brick, stone, concrete, mortar, stucco, fiber cement, EIFS, PVC molding and trim board, and composite wood
- Seals gaps up to 3" wide; joint size should not exceed 3" wide x 1/2" deep - use backer rod if the joint depth exceeds 1/2"
- Paint ready in 2 hours with latex or oil-based paints
- Tooling time 15 minutes; tack-free in about 30 minutes; full dry through in 24 hours
- Water ready 24 hours after application
- Cured sealant is mold and mildew resistant
- Meets ASTM C920, Class 25; rated for +/-25% dynamic joint movement (ASTM C719)
- Apply between 40F and 100F; service temperature range -30F to 180F
- Coverage: about 55 linear feet at a 3/16" bead per cartridge, roughly 660 linear feet per case of 12
- Low odor, VOC compliant, easy water clean-up; interior and exterior use
- Shelf life 12 months
- DAP Lifetime Guarantee - warranted for sealant purposes for the lifetime of your home when used as directed, within one year of purchase
- Manufacturer part: 7079818706
For best results: Apply between 40F and 100F, and not when rain or freezing temperatures are forecast within 24 hours. Cooler temperatures and higher humidity slow drying. Priming is not usually necessary, but substrates that stay constantly damp after cure may need it - test one joint first. Cut the nozzle at a 45 degree angle to the bead size you want, and tool the bead before it skins over. Not for continuous underwater use, filling butt joints, surface defects or tuck-pointing.
FOR CALIFORNIA SHOPPERS
Hello Californians! Your government wants us to show you the following message:
- ⚠ WARNING: Cancer and Reproductive Harm-www.P65warning.ca.gov