The PAF post anchor secures a wood post to a concrete footing and holds it 1" above the concrete surface, as required by code, so the end grain stays out of standing water. The PAF is a one-piece design that replaces the older PA and PAE series.

• Fits 6 x 6 nominal posts (MiTek stock no. PAF66-TZ)
• 14-gauge steel, one-piece design
• G-185 triple-zinc galvanizing for use with pressure-treated lumber
• 1" stand-off plate elevates the post above the concrete (IRC R317.1.4, IBC 2304.12.2.2)
• Dimensions: 5-11/16" W x 3-1/4" H x 4-15/16" L
• Anchor bolt: (1) 5/8" diameter, minimum 4" embedment into minimum 2,500 psi concrete
• Post fasteners: (8) 10d or 16d hot-dipped galvanized nails
• Allowable bearing load (DF/SP): 10,870 lb with 10d HDG nails, 12,040 lb with 16d HDG nails
• Allowable uplift (DF/SP, 160%): 1,375 lb
• ICC-ES evaluation report ESR-3449
• Anchor bolts and nails are not included
• Manufacturer part: PAF66-TZ

Important: Not recommended for fence posts or other unrestrained applications where the post is not fixed or fastened at the top. These anchors are not designed to resist overturning (moment) loads. A minimum 2" edge distance from the outermost edge of the post base to the edge of the concrete is required to achieve the allowable loads.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov