ZAR INTERIOR OIL BASE POLYURETHANE - MATTE

ZAR Interior Oil Base Poly is an incredibly fast-drying, oil-based polyurethane that dries to a smooth finish on bare wood in just two hours with no brush marks. It features a tough, abrasion-resistant finish and self-leveling properties, and it works beautifully on hardwood floors, cabinets, furniture, bartops, wall paneling, and woodwork.

• Sheen: Matte (20 +/- 3 at 60 degrees)
• Size: 1 quart
• Oil-based interior clear wood finish; 45%% solids, 1.0-1.5 mil dry film per coat
• Recoat in 2 hours; final coat dries in 4-6 hours
• Coverage: 500-600 square feet per gallon
• Apply 2 coats; 3 coats recommended on floors
• Floors: allow 24 hours before light foot traffic and 3-5 days before normal traffic; maximum resistance in one week
• For use on wood, faux wood, MDF, Masonite, plastic, fiberglass, and metal
• Apply with a natural bristle brush, lambswool applicator, or spray
• Stir thoroughly before and during application - do not shake
• Clean up with paint thinner or mineral spirits
• Shelf life: 3 years in an unopened container
• CSI MasterFormat 09 93 23 Interior Polyurethanes
• Manufacturer part: 33912 (current ZAR order no. 832713)

Do not apply over paint, wood fillers, or finishes containing wax, stearates, or aluminum oxide. Lacquer and shellac must be removed completely first. For interior use only.

Warning: Contains petroleum distillate. Rags, steel wool, or waste soaked with this product may spontaneously catch fire if improperly discarded - immediately after use, place them in a sealed, water-filled metal container. Use only with adequate ventilation.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm-www.P65warnings.ca.gov Mineral Spirits Kerosene