Solvent-based inverted marking paint that creates crisp, accurate, long-lasting lines. Precision Line is a general purpose marking paint suited to marking the location of underground utilities at construction and excavation sites, and to surveying, landscaping, and layout work.

• Solvent-based M1600 System formula; the water-based equivalent is the Rust-Oleum M1800 System
• 17 oz fill weight in a 20 fl oz inverted aerosol can, packed 12 cans per carton
• Covers approximately 600-700 linear feet at 1 inch wide
• Dries to the touch in less than 5 minutes at 70-80 deg F and 50 percent relative humidity
• Resists early fading and chalking
• Use on grass, gravel, dirt, concrete, asphalt, and more
• Precision spray tip results in virtually no overspray
• Adheres to hot surfaces and can be sprayed in the cold down to 25 deg F, which may slightly reduce the delivery rate
• Apply at 40-90 deg F with humidity below 85 percent to ensure proper drying
• Color: Safety Red
• 5 year shelf life

Tip: For best results apply with the Rust-Oleum Marking Wand (#2393000) or Marking Pistol (#210188). Sweep loose material off the surface first, shake the can for one minute after the mixing ball is heard, then invert it and hold it 4 to 10 inches above the surface. Clean the valve by spraying upright for 2-3 seconds after each use; if the valve clogs, carefully remove the spray tip and clean it in thinner, and never insert an object into the can valve opening.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov