Milescraft PocketScrews in coarse thread, with a T20 Star (Torx) drive. The T20 drive resists cam-out better than a standard Phillips or slotted head, which lets you apply higher torque without damaging the screw head or your tool. These are self-tapping, zinc coated, and use a pan head that bears solidly against the shoulder of the pocket.

• 1" length, zinc coated steel
• T20 Star (Torx) drive resists cam-out
• Pan Head for solid bearing inside the pocket
• Self-tapping
• Coarse thread, ideal for softwoods and plywoods
• 100 screws per box

Best For: 1/2" stock. A common choice for hollow doors, edge banding, and 1/2 inch plywood casework.

Tip: Compatible with Milescraft PocketJig systems and other standard pocket hole jigs. Use a T20 driver bit (not included with these screws). Milescraft lists these for indoor projects, and a coarse thread needs softwood or plywood to bite into - Milescraft also offers PocketScrews in a fine thread, which is the usual choice for hardwoods.