Rust-Oleum Professional High Performance Enamel provides a durable protective coating with superior rust prevention and high resistance to abrasion, chipping, fading and dulling. It applies easily, covers well and dries fast to a tough, attractive finish. The high-output tip cuts project time, and the any-angle spray feature lets you spray in any direction, even upside down.

• Resists abrasion, fading, chipping and dulling
• For ferrous and non-ferrous metal, wood, concrete and masonry
• Not for use on galvanized metal, or on surfaces that exceed 200 deg F when heated
• Covers approximately 14 sq ft per can at the recommended film build (assumes 15% material loss)
• Dries to the touch in 15 minutes, to handle in 1-2 hours and fully dry in 24 hours at 70 deg F and 50% relative humidity
• Apply a second coat within 1 hour or after 48 hours
• Spray between 50 and 90 deg F with relative humidity below 85%
• Hold the can upright 10-16" from the surface and apply 2 or more light coats a few minutes apart
• Shake vigorously for one minute after the mixing ball begins to rattle; if the ball does not rattle, do not strike the can
• A Rust-Oleum Professional primer adds corrosion protection, adhesion and hiding, and is especially recommended on bare wood or metal
• Modified alkyd formula; 5-year shelf life; clean up wet paint with xylene or mineral spirits
• Color: Gloss White
• Size: 15 oz aerosol can

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov