Bulls Eye Shellac is a shellac-based sealer designed to give wood a natural looking, mid-gloss finish that will not yellow or darken with age. This 12 oz aerosol makes it easy to apply several light coats to small projects, louvers, turnings and other shapes that are awkward to brush.

• Mid-tone sheen; will not darken with age
• For interior walls, doors, trim, cabinets, furniture and related paintable surfaces
• Suitable for new and previously painted drywall, cured plaster, wood (pine, fir, cedar, redwood, plywood), metal, and cured masonry (stucco, concrete block, poured concrete, brick); it will also adhere to glass and ceramic tile
• Blocks all odors in wood, plaster, drywall and masonry - two full coats seal odors
• Apply one or two coats to knots and sap streaks to keep them from bleeding into the paint finish
• Also works as a protective sealer for tools, golf clubs, wood toys and similar items
• Dries to the touch in 30 minutes and can be recoated in less than 1 hour
• Dried film is non-toxic and hypo-allergenic
• MPI #36 and #88 certified
• Clean up wet tools, drips and spills with denatured alcohol or household ammonia and water
• Apply only when air, material and surface temperatures are between 0 and 90 deg F and relative humidity is below 85%
• Manufacturer part: 00408
• Size: 12 oz aerosol can

Important: Bulls Eye Shellac is not recommended for use as a sealer under polyurethane. When sealing wood under a polyurethane finish, use Zinsser Bulls Eye SealCoat instead. If the surface is going to be painted, use B-I-N Primer-Sealer.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov