Anderson Metals 150 lb standard-pattern threaded elbow in Type 304 stainless steel, turning a threaded run through a right angle. Anderson's own note on this line: these fittings are excellent for uses that involve chemicals or liquids that may be corrosive, and a stainless steel pipe fitting will prevent contamination.

• Size: 1/2" FNPT x 1/2" FNPT
• Fitting type: 90-degree elbow
• Material: 304 stainless steel
• NPT thread designation: 1/2-14
• Pressure class: 150 lb - 300 psi rating
• For use with: air, water, oil, natural gas, steam
• Dimension standard: ASME B1.20.1
• Manufacturer part number: 62103B

Tip: Wrap the mating male thread with two or three turns of PTFE tape or use a stainless-compatible thread sealant, and stop tightening as soon as the joint seals. Type 304 threads gall under excessive torque, which can lock the fitting permanently or split the female port.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  Warning: This Product Can Expose You To Chromium Which Is Know To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. Www.P65Warnings.Ca.Gov