Anderson Metals lead free brass short flare nut secures 1/4" OD flared tubing against a 45-degree flare fitting body. Machined from brass rod, the joint resists mechanical pullout and can be taken apart and reassembled many times with no effect on the seal.

• Tube O.D. size: 1/4"
• Thread size: 7/16-20
• Machined from brass rod
• Temperature range: -65 degrees F to 250 degrees F
• Use with copper, brass, aluminum, or steel tubing
• Primary uses: fuel equipment, plumbing, gases, refrigeration, and vacuum
• Lead free compliant product which meets Public Law 111-380
• Manufacturer part: 754014-04

Tip: Slide the nut onto the tube with its threads facing the end before flaring the tube. Thread it onto the fitting body until snug, then about 1/6 turn more.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: This product can expose you to lead a chemical known to the State of California to cause cancer and reproductive harm. www.P65Warnings.ca.gov