This combo pack carries the EX-3 spiral flute screw extractor together with the correctly sized high-speed steel drill bit, so one purchase covers both steps of removing a broken stud, bolt, socket screw or fitting. The aggressive left-hand spiral bites harder the more you turn it, so the extractor grip increases as the fastener resists.

• Removes broken fasteners 7/32" to 9/32" (6 to 8 mm, #12)
• Aggressive left-hand spiral design for extra gripping power
• Spiral flutes embed deeper into the metal as you turn the tool, so the extractor grip increases as fastener resistance increases
• Extractor size and recommended drill bit size are etched on each tool
• Includes the matching 5/32" high-speed steel drill bit for fast, clean pilot holes
• Carbon steel extractor construction
• IRWIN recommended tap wrench: TR-88
• IRWIN Hanson 537 Series Combo Pack, part no. 53703

Tip: Center-punch the broken fastener so the drill does not walk, drill the pilot hole straight and on-center with the size above, then turn the extractor counterclockwise with a tap wrench. On rust-frozen fasteners, let penetrating oil soak in (or apply gentle heat) before turning the extractor.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause cancer birth defects or other reproductive harm.