Cross-linked polyethylene (PEX-B) tubing for potable hot and cold water distribution. Flexible construction reduces the number of fittings and joints required in a run, minimizing potential leak points and speeding installation compared to copper or CPVC.

• Cross-linked polyethylene (PEX-B) construction
• Manufactured to ASTM F876 dimensional and ASTM F877 performance standards
• NSF/ANSI 61 certified for potable water use
• Pressure rating: 160 PSI at 73 deg F, 100 PSI at 180 deg F
• Compatible with ASTM F1807 copper crimp rings and F2098 stainless clamp fittings
• Color-coded white as a universal or main-run color (red hot / blue cold / white main-run)
• Flexible enough to bend around corners and expand under freeze conditions
• Can be run through wall cavities, floor joists, slab, or above ground indoors
• Size: 1/4" x 5 Ft

Tip: Cut with a dedicated PEX cutter for a clean, square face; support long runs every 32 inches on horizontal runs to avoid sag. Keep PEX shielded from prolonged direct sunlight to prevent UV degradation.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov