Amerimax 75-degree square corrugated A-front gutter elbow for K-style galvanized steel gutter systems. Use at the top and bottom of downspouts to direct stormwater off the eave and away from the foundation. The corrugated rib pattern adds rigidity at the bend so the elbow keeps its shape after years of expansion-contraction cycles, and the rust-resistant galvanized finish gives the part a long outdoor service life under flowing water.

• Fits 2" x 3" galvanized steel downspouts
• Bend angle: 75 degrees (the standard residential downspout offset)
• Fit type: A-front (Style A) - bends toward the FRONT or BACK of the downspout face
• Material: 28-gauge galvanized steel
• Profile: Square corrugated to match K-style gutter components
• Female-female socket ends crimped for slip-fit into the downspout and matching elbow
• Compatible with all standard K-style galvanized 2" x 3" downspout systems
• Attach with sheet metal screws or 1/8" pop rivets (not included); seal joints with gutter sealant on top-of-downspout connections

Tip: The A-front (Style A) elbow is the FORWARD or BACKWARD bend - use it at the top of the downspout to bring the spout from the gutter outlet back against the wall, and at the bottom to kick the discharge away from the foundation. The classic two-elbow downspout offset stack uses an A-front at the top paired with another A-front at the bottom to bring the downspout in toward the wall; pair an A-front with a B-side when you need to redirect left or right at the same time. Drives water 3-6 ft from the foundation when paired with a splash block or extension at the bottom.