Wrot copper reducing tee that steps the run itself down to a smaller size as it branches. JMF supplies wrot, cast and DWV copper fittings for commercial, residential and industrial work, and the wrot pressure line is the one plumbing, HVAC and refrigeration trades reach for on solder-joint runs.

• Nominal size: 3/4" x 1/2" x 3/4"
• Cup accepts copper tube of 7/8" x 5/8" x 7/8" outside diameter
• JMF catalog number 611RR
• Reducing tee - the run itself steps down, not just the branch
• All ends are C (cup) solder joints - a copper end made to receive copper tube in diameter
• Wrot copper per ASTM B75 Alloy C12200; copper content 99.90 percent or greater with 0.015 to 0.040 percent phosphorus, essentially lead free
• Made to ASME B16.22 (Wrot Copper and Copper Alloy Solder Joint Pressure Fittings) and MSS SP-104 (Wrot Copper Solder Joint Pressure Fittings)
• Listed to NSF/ANSI 61-G for drinking water system components

Tip: The size stamped on a sweat fitting is the nominal tube size, not a measured diameter - a 3/4" cup takes tube measuring 7/8" across the outside. Measure the tube's outside diameter and step back one eighth of an inch to find the nominal size you need.