Gardner Bender color-coded vinyl-insulated female disconnect terminals quick-connect stranded wire to standard spade or blade terminals. The blue vinyl barrel matches the industry color code for 16-14 AWG wire, so a glance at the part tells you the gauge it's sized for. This is the contractor box pack of the 16-14 AWG version - higher count for jobs that go through terminals fast.

• Wire range: 16-14 AWG
• Color code: Blue (industry standard for 16-14 AWG)
• Vinyl-insulated brass barrel with tin-plated finish for corrosion resistance
• Receives a male spade or blade terminal - quick-connect, no tools needed to mate
• Crimp-on installation with a standard insulated-terminal crimper
• Bulk box for trade shop, fleet, and high-volume harness work

Tip: Strip about 1/4" of insulation, twist the strands tight, and seat the wire fully into the barrel so the insulation just touches the vinyl - a wire that bottoms short of the barrel will pull out under vibration. Crimp with the insulated-terminal jaw of a ratcheting crimper (not the bare-terminal jaw, which will cut the vinyl). Give the wire a firm tug after crimping to confirm the bite.

Use: 16-14 AWG automotive harnesses, trailer wiring, accessory wiring, appliance circuits, control panel jumpers, and any spade-terminal connection that needs to be field-serviceable.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.