M-D Building Products supplies a full assortment of aluminum shapes and sheets, produced to extremely close tolerances so they drop into whatever you are building. This equal-leg angle comes with a plain mill finish and can be cut to the length you need, which makes it a staple for scratch builders, modelers, machine shops, and everyday architectural and repair work.

• Equal legs: 1-1/4" x 1-1/4"
• Wall thickness: 1/8"
• Length: 48" (cut to size as needed)
• Mill finish aluminum (mill silver) - paintable
• Rust and corrosion resistant
• For general indoor projects and outdoor use
• Cut with a hacksaw or a carbide-tip steel-cutting blade (not included)
• Attach to other materials with sheet metal screws

Wall thickness: 1/8" is the heavier of the two wall thicknesses M-D offers in this profile, with roughly twice the cross-section of the 1/16" wall at the same leg size - the pick for brackets, supports, and framing rather than pure trim work.

Caution: Extruded and cut aluminum edges are sharp - wear gloves and deburr cut ends before handling or installing. M-D also lists anodized versions of this angle profile under separate part numbers if you need a finished surface rather than mill.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.