Flame Guard is a granular additive designed to give paint a Class "B" fire retardant rating. Just double the dose and it becomes a Class A fire retardant additive.

Flame Guard can only be added to a flat latex coating. Otherwise, it will gel the coating. Your paint is fully tintable with Flame Guard.

Testing data employed for measuring the flame spread rate was ASTM D 3806-79 that corresponds with ASTM E-84. It assumes Class "A" specification when used as directed.

Flame Guard does not foam. It suffocates the substrate from the flame; therefore, if there is no oxygen for the flame, there is no fire. Flame Guard should be used on interior surfaces wherever you wish to slow the spread of the flame.

Use Flame Guard treated paint in schools, hospitals, nursing homes, private dwellings, and day care facilities, or wherever you wish to have added protection in your home such as children's rooms or kitchen.

• A granular paint additive designed to give paint a Class "B" fire retardant rating; double the dose for Class "A"
• NOTE: Can only be used with flat latex coating/paint
• Paint is still fully tintable with Flame Guard
• Should be used on interior surfaces wherever you wish to slow the spread of the flame
• Use in schools, hospitals, nursing homes, private dwellings, and day care facilities, or wherever you wish added protection
• Lasts 3 to 5 years
• This 6 ounce pouch is one dose to treat one gallon of flat latex paint to result in a Class B rating. For Class A rating, use two pouches per one gallon of flat latex paint.