The National Hardware Utility Shelf Bracket is a plain-steel L-bracket for garage, workshop, closet, and pantry shelving where structural capacity matters more than finish quality. The deep-rib stamping gives the bracket its rigidity, and the shelf leg is bent slightly upward (about 9 degrees) so shelved items don't slide toward the front edge. The White baked-on finish is a utility coating rather than a decorative one and may show small blemishes.

• Cold-rolled steel with a deep-rib stamping for strength
• 5" x 6" legs (wall leg x shelf leg) sized to standard lumber widths
• Six #7 wood-screw holes per bracket
• Shelf leg pitched about 9 degrees up so items stay put
• Baked-on White utility finish resists rust in dry indoor use
• Safe working load: 100 lbs per pair when anchored into studs
• Boxed loose - utility grade, may have minor surface blemishes

Tip: Match the wall leg length to the shelf leg you need to support, and anchor both mounting screws into a stud or a rated drywall anchor - the 100 lb rating assumes the fasteners hold.