Heavy-duty extruded aluminum door threshold sized for double doors and oversized openings. A replaceable vinyl insert across the top rides against the door sweep to close the gap when the door is shut, and vinyl caulk feet on the underside seal the threshold to the floor. The aluminum extrusion holds its shape under foot traffic, and the vinyl insert pops out and replaces in seconds when it wears.

• Heavy extruded aluminum body with mill aluminum finish
• Replaceable vinyl insert held in place by a steel retainer
• Vinyl caulk feet on the underside seal the threshold to the floor
• Width: 3-3/4" Height: 1-1/8"
• Length: 72" - sized for double doors, French doors, and oversized openings

Pairs with: Run this threshold against a matching door sweep on the bottom of the door slab. The threshold seals the floor side, the sweep seals the door side, and together they close the bottom gap completely.

Installation: Slide the doors open, measure the doorway width, cut the threshold to length with a fine-tooth hacksaw, dry-fit it against the existing doors, pre-drill countersink screw holes through the body (place one at each end and every 12" to 16" across a 72" span), and fasten down with flooring screws. Replace the vinyl insert each season or whenever it shows cracking.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.