DAP Weldwood Multi-Purpose Ceramic Tile Adhesive is a white synthetic acrylic latex mastic for the interior installation of ceramic tile on walls, floors and countertops. It grabs quickly and holds tile without slippage, so wall tile can be set from the top of the substrate down.

• Interior use only; bonds to masonry, fully cured plaster, gypsum panels, underlayment-grade plywood and cementitious backerboards
• Exceeds ANSI A136.1 Type I requirements
• For quarry tile and pavers, vitreous tile (glass, mosaic, ceramic mosaic and porcelain), wall tile, and slate or marble stone up to 8"
• Water resistant, nonflammable and VOC compliant
• Open time approximately 25 to 35 minutes; grout walls and countertops after 24 hours, floors after 24 to 72 hours
• Coverage: 9-12 sq ft with a 5/32" V-notched trowel, 16-19 sq ft with a 1/8" V-notch
• Clean up wet adhesive with warm soapy water; use mineral spirits on tools and flooring
• Medium paste, 70% solids by weight; apply between 40 and 100 deg F
• 12-month shelf life in an unopened container stored cool and dry
• Size: 1 Quart, white

Not for: button-back tile, floor tiles larger than 8" x 8", Mexican tile or green marble. No DAP product in this line is recommended over particle board, lauan chipboard, metal, glass, plastic, expansion joints or wallpaper.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer-www.P65warning.ca.gov