This Fernco repair coupling provides a reliable, watertight connection between plastic pipe and plastic socket hubs. The flexible elastomeric PVC sleeve conforms to pipe surfaces under clamp pressure, creating a secure seal for drain, waste, and vent applications.

• Connects 2" plastic socket to 2" plastic pipe
• Elastomeric PVC sleeve with 300 series stainless steel clamps
• Maximum pressure: 4.3 PSI
• Compatible with PVC, ABS, cast iron, steel, copper, and lead pipe
• Operating temperature: -30 deg F to 140 deg F
• For above or below ground DWV installations
• Meets ASTM D5926 and C1173 standards
• Size: 2"
• Manufacturer Part Number: P1059-22

Tip: Tighten the clamps to the manufacturer's torque spec (usually 60 in-lb) rather than going by feel. Overtightening can deform the sleeve and create leak paths; undertightening leaves the joint loose.