CIRCUIT BREAKER LOAD CENTER
Welded sheet steel with knockouts at top, bottom, back and sides. Finish: gray baked enamel electrodeposited over cleaned, phosphatized steel. Most indoor enclosures are 14.25 in (362 mm) wide. Top or bottom feed by rotating enclosure. Interior use only.
- Doors to cover circuit breaker handles, except on 2-4, 4-8 and 6-12 circuit models.
- Combination flush and surface cover with latch opening door included with load centers.
- Convertible - Factory installed main lugs
- Automatic flush adjustment is standard.
- Triple lead cover screws for fast cover installation.
- Shutter-type twist-outs
- Main NOT installed
- L type main lugs
- Feed through construction
- 10,000A max short circuit
- 20 spaces
- Wire size: #6 to #2/0 AWG(Al/Cu)
- 26" H x 14.25"W x 3.75" D